close
Choose Your Site
Global
Social Media
Validate materials and molded parts across your Injection Molding Machine workflow. With in-house R&D, CNC precision machining, ISO9001-certified processes, and 17+ years of experience, we supply standards-aligned plastics testing equipment for automotive, wire and cable, aerospace, and packaging.
Consistent testing links resin properties and processing parameters to part performance. It reduces scrap, stabilizes cycle time, and speeds approvals. Our tools help address brittleness, warpage, burn marks, and stress cracking.
For electric, hybrid, or hydraulic platforms, we provide line-side and lab instruments. Monitor incoming resin, in-process stability, and end-of-line performance without slowing throughput.
Accurate MFR/MVR correlates with fill, packing, and cycle time. Stable temperature, automated cutting, and methods per ISO 1133 and ASTM D1238 keep lots within spec.
HDT and Vicat data guide mold design and demold timing. Precise heating control and multi-station throughput support quick comparisons across grades and modifiers.
Measure tensile strength, modulus, and elongation on dumbbells or custom coupons. Frames, grips, and extensometers cover thin-wall parts, engineering resins, and reinforced compounds.
Quantify impact resistance to manage notch sensitivity and gate-induced stress. Multiple pendulum energies and automatic angle detection support repeatable results.
Verify sliding behavior and scuff resistance for films, interiors, and housings. Optimize mold release agents and surface finishes with repeatable measurements.
Simulate service conditions with constant temperature and humidity, thermal shock, UV/Xenon aging, and salt spray to predict long-term performance.
Validate ingress protection for enclosures. Achieve post-cure or drying with uniform, stable ovens tuned for polymer parts.
Assess ignition behavior and flame propagation for electronics and appliance parts.
Prepare plaques and test bars using flat plate hot presses, cutters, and notchers matched to polymer classes.
Set up quick-measure stations with barcode or LIMS connectivity so test data feeds process adjustments in real time.
Design grips, supports, and chambers for thin ribs, living hinges, overmolded inserts, and multi-shot parts.
Receive planning, on-site installation, calibration, training, and ongoing maintenance to keep uptime high.
ISO9001 certification, National High-Tech credentials, and 20+ utility model patents support dependable instruments.
CNC machining, calibration labs, and rigorous QA deliver repeatable performance across thousands of units.
Deliveries to 50+ countries and a growing distributor network support worldwide service and parts.
Combine tensile, impact, HDT, thermal shock, and UV aging to support smoother PPAP approvals.
Confirm flame class, glow wire indices, and mechanical retention for safe, compact designs.
Balance shelf appeal and efficiency by tuning opening force, slip, and abrasion resistance.
Typical temperature range with ±0.2°C stability; multiple weights; auto-cut; data export.
Low-force to high-capacity frames; ±0.5% accuracy; wide speed range; extensometer options.
Interchangeable pendulums; automatic angle detection; energy ranges for thin and thick sections.
Temperature -70 to +180°C (model dependent); humidity 10–98% RH; UV/Xenon control; fast thermal shock baskets.
Q: Which tests are most critical for automotive parts?
A: Tensile and impact are common baselines. Add HDT/Vicat and environmental cycling. Include flammability when specified.
Q: Can these instruments sit near an Injection Molding Machine on the shop floor?
A: Selected systems support line-side use with compact footprints, safety enclosures, and data connectivity.
Q: Do the instruments support international methods?
A: Yes. Coverage includes ISO, ASTM, IEC, and UL methods widely referenced for molded plastics.
This category curates testing instruments commonly paired with molding workflows, from resin qualification to finished part reliability. Contact Injection Molding Machine testing equipment supplier to discuss configurations or request a quote.
No products found
